How to Create and Apply a Configuration

Adjusting Device Settings

After the camera is connected, use the ON/OFF toggles to enable or disable available device features.

Saving Changes

1. After adjusting settings, click Save Changes.
2. The device will automatically reboot.
3. Wait a few seconds for the device to reconnect.
4. Once the device reconnects, the new settings are applied.

Disconnecting the Device

Always click Disconnect in the configurator before physically removing the camera from the dock.

Adding a Custom Splash Screen

A splash screen is the image displayed when the camera powers on. You can upload a department logo or other approved startup image.

1. Turn Splash Screen ON.
2. Click Upload Image.
3. Select a JPEG or PNG image file.
4. Reposition the image in the preview window as needed.
5. Click Use Image.
6. Click Save Changes.

The device will reboot and apply the new splash screen.

Applying Configurations to Multiple Devices

You can export a configuration from one camera and import it onto another device to apply the same settings.

Export a Configuration

1. Configure the first device.
2. Click Export Configuration.
3. Save the configuration file to your computer.

Import a Configuration

1. Connect the next device.
2. Click Import Configuration, or drag and drop the configuration file onto the configurator.
3. Click Save Changes.

Restoring Factory Settings

Use Restore Factory Settings to return feature settings to the original out-of-box feature configuration. Custom Splash Screen will remain.  

1. Connect the device.
2. Click Restore Factory Settings.
3. Confirm when prompted.

Available Features